Automatic buckle drawing-in, label sticking and sewing machine for pet leashes

    The machine has made a huge innovation in traditional pet leashes field. We have updated this machine to full-automatically operation, which decreases the number of workers sharply and cut the expense hugely.

    When  using  this  machne, at first, the machine will cut down the nylon strap, then with the method of bevel angle on the head of strap, choosing the preset length of label and transmitting to the ordered place automatically, which will weld on the surface of nylon strap. Next, the manipulator tightens the head of strap, transmit to the hole of steel crochet and reverses to the opposite side.  After that, the manipulator will clamp the strap and steel crochet, which will transmit them to the sewing machine with a multi-shape sewing. At this moment, a convey roller will transmit the nylon strap to a set length, The hotting blade will cut down the strap. At the same time, it will have a bevel angle at the end of strap also. The manipulator turns back the strap to form a circle. Then, it will put the nylon strap to the pre-welding label place. The manipulator will clamp and send it to the sewing machine with multi-shape sewing again. After finishing all these procedures, the machine will transmit pet leashes to the angle side , slipping to production line with other testing procedures.

    The machine can produce two 1.2 meter pet leashes per minute. In addition, a special steel blade applies to this machine. This blade will not out of shape even in 500 degree Celsius over  a long period of time. More importantly, the edge is clean and smooth without any burrs. The machine requires only one person to manipulate the machine and it  can replace 6 persons’ work.

    Given  that environmental factor, The closed type shell was applied to the machine so that workers can supervise the procedure throughout transparent shell. In addition, it has straightened the stability and safety by installing photoelectric eye equipment.